LPs Third GBZ(W)
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: LPs Third GBZ(W)
Also, thanks to @IAmOrion for his Leonardo code.
I needed to reduce bounce and this works perfectly.
I needed to reduce bounce and this works perfectly.
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: LPs Third GBZ(W)
@LphillimoreLphillimore wrote: ↑Fri Mar 24, 2017 11:09 amWired up the Leonardo this evening and tested. All working nicely. Plugged it into my original GBZ and added as an additional controller.
Thanks to @sotasystems for this, first Leonardo ive used and the guide was spot on.
My setup is standard with L1 and R1 for this build.
20170325_004304-1134x2016.jpg
Hey, i'm going to use those same L/R buttons in my 3rd GBZ. When it comes to wiring I see that you have the bottom pin wired to ground and the top to the teensy. Can you tell me what orientation the buttons need to be in for that configuration? I haven't used them in anything yet and I don't have one in front of me to have a look, I plan to do it after I get home from work. Let me know if you have any advise.
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: LPs Third GBZ(W)
Hey @rodocoprodocop wrote: ↑Mon Apr 24, 2017 12:51 pm@LphillimoreLphillimore wrote: ↑Fri Mar 24, 2017 11:09 amWired up the Leonardo this evening and tested. All working nicely. Plugged it into my original GBZ and added as an additional controller.
Thanks to @sotasystems for this, first Leonardo ive used and the guide was spot on.
My setup is standard with L1 and R1 for this build.
20170325_004304-1134x2016.jpg
Hey, i'm going to use those same L/R buttons in my 3rd GBZ. When it comes to wiring I see that you have the bottom pin wired to ground and the top to the teensy. Can you tell me what orientation the buttons need to be in for that configuration? I haven't used them in anything yet and I don't have one in front of me to have a look, I plan to do it after I get home from work. Let me know if you have any advise.
Being honest, as these switches are also 4 pin I assumed they would follow the same wiring as the smaller tactile switches used by @wermy.
I therefore glued them in without testing them.
When I wired them up I found that R1 wasn't working, even though its orientation and wiring was same as the L1 switch.
This lead me to believe that I had either used a dud switch or one that wasnt necessarily the same as the L1 switch.
I therefore swapped the ground and Leonardo wires over and retested and this worked fine.
I have since used these switches again on my 4th build and this time no issues.
I decided to share ground across the trigger buttons top outer pins.
I used the L1 button bottom left outer pin to attach to Ground on the PCB .
I then wired the bottom inner pins for the L and R buttons and wired to the PCB respective pads / holes.
Hope this makes sense.
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: LPs Third GBZ(W)
This one is now sold so putting together the 'pack' before it goes.
Waiting on some screen protectors and some red headphones.
The USB stick will have the Quick Guide on that I'm making.
Hopefully a full manual in due course.
Waiting on some screen protectors and some red headphones.
The USB stick will have the Quick Guide on that I'm making.
Hopefully a full manual in due course.
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: LPs Third GBZ(W)
It's just going to be a pdf of the GBZ. A quick hardware overview and key functions etc.
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: LPs Third GBZ(W)
She's off to a new home!
Package complete.
1x Red GBZ (Pi Zero, Retropie 4.2, 16gb SD, USB Audio, 3000mah battery)
1x Case with Raspberry Sticker
1x Red micro USB charge cable
1x Red USB stick containing Quick Guide .pdf
1x Red and black headphones
1x Screen cleaning cloth
1x WiFi Adapter
Package complete.
1x Red GBZ (Pi Zero, Retropie 4.2, 16gb SD, USB Audio, 3000mah battery)
1x Case with Raspberry Sticker
1x Red micro USB charge cable
1x Red USB stick containing Quick Guide .pdf
1x Red and black headphones
1x Screen cleaning cloth
1x WiFi Adapter
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- TheDeviantZen
- Posts: 89
- Joined: Tue Feb 21, 2017 7:57 am
- Location: Leiria, Portugal
- Has thanked: 85 times
- Been thanked: 23 times
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: LPs Third GBZ(W)
Case is a 3DS XL case from ebay:
http://www.ebay.com.au/itm/291980278104
Stickers are from:
https://swag.raspberrypi.org/products/stickers
http://www.ebay.com.au/itm/291980278104
Stickers are from:
https://swag.raspberrypi.org/products/stickers
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
Re: LPs Third GBZ(W)
Hey Lphillimore, i'm wondering about your wiring for the usb audio.
Do you mind to explain it a little bit more?
I tried to follow the guide from Kilren, but I can't get mine to work.
Thanks in advance.
Do you mind to explain it a little bit more?
I tried to follow the guide from Kilren, but I can't get mine to work.
Thanks in advance.
Who is online
Users browsing this forum: No registered users and 1 guest