3DS Cap that fits a PSP1000 - .STL

Share your STL files, CAD design files, etc. here!
User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by HoolyHoo » Fri Mar 09, 2018 8:34 pm

AntFJ wrote:
Fri Mar 09, 2018 8:11 pm
Hoolyhoo - Any chance you could upload the .stl file you used after fixing the scaling issue? What settings did you use to print it? I have trouble getting the settings for supports set correctly.
Sure, here you go.
3DS.zip
(493.54 KiB) Downloaded 410 times
I printed it in the orientation as seen here:
CapShow
3ds.png
3ds.png (675.37 KiB) Viewed 10935 times
I printed at .2mm first layer and subsequent layers at .1mm. Supports on the bottom.

User avatar
AntFJ
Posts: 178
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 37 times
Been thanked: 115 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by AntFJ » Fri Mar 09, 2018 10:27 pm

That did the trick. Perfect fit!! I need to mess with the settings some more to get it to come out cleaner. Very cool!

User avatar
nobble
Posts: 20
Joined: Tue Feb 20, 2018 4:54 pm
Has thanked: 10 times
Been thanked: 17 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by nobble » Sat Mar 10, 2018 11:10 am

I'm using the STL in my RetroPie Futureboy build. I just posted a work log on the forums! Thanks for the work on this! I printed mine in clear filament, and it's going in a transparent case. So having clear sliders to match only made sense!

User avatar
markolomew
Posts: 60
Joined: Wed Aug 23, 2017 1:31 pm
Location: Houston, Texas
Has thanked: 38 times
Been thanked: 37 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by markolomew » Sat Mar 10, 2018 11:21 am

nobble wrote:
Sat Mar 10, 2018 11:10 am
I'm using the STL in my RetroPie Futureboy build. I just posted a work log on the forums! Thanks for the work on this! I printed mine in clear filament, and it's going in a transparent case. So having clear sliders to match only made sense!
Post a link, I'd love to see it
Check out my builds: Click Here
Free .STL files for 3DS/PSP joystick cap mashup: Click Here
Check out my store, 8bitmark.com: Click Here

User avatar
AntFJ
Posts: 178
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 37 times
Been thanked: 115 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by AntFJ » Sat Mar 10, 2018 5:36 pm

Perfect!
SpoilerShow
20180310_162347.jpg
20180310_162347.jpg (1.98 MiB) Viewed 10904 times
20180310_162248.jpg
20180310_162248.jpg (2.15 MiB) Viewed 10904 times
Cura Settings
SpoilerShow
Joystick Cap Print Settings 1.PNG
Joystick Cap Print Settings 1.PNG (31.15 KiB) Viewed 10904 times
Joystick Cap Print Settings 2.PNG
Joystick Cap Print Settings 2.PNG (29.98 KiB) Viewed 10904 times

User avatar
nobble
Posts: 20
Joined: Tue Feb 20, 2018 4:54 pm
Has thanked: 10 times
Been thanked: 17 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by nobble » Tue Mar 13, 2018 10:35 pm

markolomew wrote:
Sat Mar 10, 2018 11:21 am
nobble wrote:
Sat Mar 10, 2018 11:10 am
I'm using the STL in my RetroPie Futureboy build. I just posted a work log on the forums! Thanks for the work on this! I printed mine in clear filament, and it's going in a transparent case. So having clear sliders to match only made sense!
Post a link, I'd love to see it
https://www.element14.com/community/com ... -like-heck

I had issues when a friend was printing them where there's a bunch of teeth on the bottom sides. Im not sure if it's the filament or not.

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by erik_gee » Wed Mar 14, 2018 1:34 am

Hey I see you put it up !
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

User avatar
markolomew
Posts: 60
Joined: Wed Aug 23, 2017 1:31 pm
Location: Houston, Texas
Has thanked: 38 times
Been thanked: 37 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by markolomew » Wed Mar 14, 2018 12:36 pm

Love the idea of adding a projector. Can't wait to see how that turns out!
Check out my builds: Click Here
Free .STL files for 3DS/PSP joystick cap mashup: Click Here
Check out my store, 8bitmark.com: Click Here

Double0EK
Posts: 72
Joined: Thu Dec 08, 2016 4:50 pm
Has thanked: 53 times
Been thanked: 8 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by Double0EK » Fri Mar 16, 2018 11:02 am

I haven't used the 3DS Joystick .. so just wanted to know if this cap larger than the PSP1000 Cap?
That PSP1000 Cap kinda sucks.

User avatar
markolomew
Posts: 60
Joined: Wed Aug 23, 2017 1:31 pm
Location: Houston, Texas
Has thanked: 38 times
Been thanked: 37 times

Re: 3DS Cap that fits a PSP1000 - .STL

Post by markolomew » Fri Mar 16, 2018 11:12 am

Double0EK wrote:
Fri Mar 16, 2018 11:02 am
I haven't used the 3DS Joystick .. so just wanted to know if this cap larger than the PSP1000 Cap?
That PSP1000 Cap kinda sucks.
Yes, the 3ds cap is larger and has better contour. Print one of these out, it's a game changer.
Check out my builds: Click Here
Free .STL files for 3DS/PSP joystick cap mashup: Click Here
Check out my store, 8bitmark.com: Click Here

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest