Here is my first "GBZ - Kite's Circuit Sword CM3 with Qi CHARGER build".
- November 2017 i bought Kite's Circuit Sword.
- February 2018 i finally received Kite's PCB Circuit Sword with other parts from Ali and i started my build.
- 6 month later i finished my build but always trie to make some improvements with 3D printing, to fixe some parts with no glue (that i hate so much).
T'ill now i still continue to improve it.
Here is the final result !
Gray version (update Juin 2019)
Update pictures Juin 2019
Techicals parts :
- SanDisk Memory Card Extreme microSD UHS-I microSDXC Class10 U3 100 MB/s 32GB : https://fr.aliexpress.com/item/SanDisk- ... Title=true
- GB case : https://fr.aliexpress.com/item/1set-Ful ... Title=true
- Speaker GHXAMP 1 POUCE (28mm ) 4Ohm 2 W (VERY GOOD QUALITY) : https://fr.aliexpress.com/item/GHXAMP-1 ... 0.0.HMShyy
- Joystick (Analog Joystick For PSP 1000) : https://fr.aliexpress.com/item/Black-3D ... Title=true
- Analogique Joystick grip (Nintendo New 3DS XL/LL 3 DSXL 3 DSLL 2DS) : https://fr.aliexpress.com/item/Analog-J ... 0.0.NRzrNL
with PSP 1000 BLACK 3D Analog Joystick Stick Cap : https://fr.aliexpress.com/item/5-PCS-LO ... Title=true
- Conductive Silicone Push Button (for L&R buttons) : https://fr.aliexpress.com/item/20pcs-lo ... Title=true
- Color SNES Plastic Buttons A B X Y : https://fr.aliexpress.com/item/Pour-SNE ... Title=true
- 4Pin Batterie Connector : https://fr.aliexpress.com/item/3PCS-New ... 0.0.XsNLnH
- GB Cartridge : https://fr.aliexpress.com/item/1x-For-G ... Title=true
- Volume Wheel (volume rocker) : https://fr.aliexpress.com/item/Free-shi ... Title=true
- Battery Mbuynow 4800 mAh Lithium-Ion : https://www.amazon.fr/dp/B00NM9TAAM/ref ... eml_rv0_dp
- 3-Pin Connector plug with Wires : https://fr.aliexpress.com/item/10SETS-L ... Title=true
- 2-Pin Connector Plug with Wires Cables 120MM : https://fr.aliexpress.com/item/50-SETS- ... Title=true
- Kapton Tape : https://fr.aliexpress.com/item/20mm-33M ... Title=true
- Caps 6x6mm for L1,2/R1,2 buttons & mode button :
https://fr.aliexpress.com/item/10pcs-A1 ... Title=true
- Gorilla Glass custom screen cover for GBz/cm3 (by YaYa) : https://www.sudomod.com/forum/viewtopic ... 240#p61240
- Glue Less Support Bracket for Kite's Mode/Power Switch Board by HoolyHoo (improved for my Mode button) : https://www.sudomod.com/forum/viewtopic.php?f=58&t=5321
- micro switch (for Mode button) : https://fr.aliexpress.com/item/R300-02- ... Title=true
- LCD screen holder HoolyHoo's AIO bracket for Kite's SAIO Board (by HoolyHoo) : https://www.sudomod.com/forum/viewtopic.php?f=27&t=2553
- L1,2/R1,2 bracket for CSO Button Board (by kubino) : https://www.sudomod.com/forum/viewtopic.php?f=58&t=5397
- Case Bag for New 3DS XL 3DS LL 3DS XL 3 : https://fr.aliexpress.com/item/High-Qua ... Title=true
I begin to do my build with Gray color Gameboy but after some mistakes to drilling holes i decided to choose the Black one.
After what i have seen that there is a very big difference between a quality of plastic.
The Black color plastic is much more solide than Gray one.
My advice to you : Buy 2 or 3 more Game Boy case.
Cause if you buy some parts from Ali, it's takes long time to arrive to you,
so if you make some mistakes with drilling your button holes or cutting case, you have another one.
I cut also for a Micro USB charger hole.
Not really easy to do cause i have no holes guide.
Size of buttons Caps 6x6mm :
https://fr.aliexpress.com/item/10pcs-A1 ... Title=true
Only for joystick there is no guide part
It's including Joystick !
But it's not really easy to do the right hole in the middle for joystick!
One you done it, you are really happy !
For screws i used cuts parts that i put it inside. It's better than just plastic ABS.
You need to take off the black "membrane" of joystick, other way you can not fit it inside.
I soldered the pins of switch button really at the end and bend it like that.
I tried all before i decided to buy screen of YaYa
Take off the color from original screen with Acetone doesn't worked well.
Plastic was deformed and border color still here even after scratching.
I bought one screen glass and tried to paint the border, but the paint doesn't adheres well.
T'ill i finally bought YaYa screen !
Happy end!
Adding additional wires for Micro USB and Qi Charger mode :
Still working on holder for 3 pins battery connector.
Waiting for 3D parts.
last update 12 may 2018.
Hole for charger battery pins.
Foam to fit the battery better with little close headband to take off battery easy.
Final result !
Little Goonies keychain made by my daughter with Fimo Polymer.
Big Thank's to Kite!
Thank's for all community, this web site, and everyone who contribute on it.
Now i can play on it, see my favorite movie on my bed (using Kodi), and it's always with me when i'am out of home!
Never give up guys !