Audio Question

Having trouble with your GBZ build? Ask your questions here!
Post Reply
Kmencini62
Posts: 11
Joined: Sat Apr 21, 2018 6:18 pm
Has thanked: 7 times
Contact:

Audio Question

Post by Kmencini62 » Thu Jun 14, 2018 12:52 pm

Hello, I am a mega noob when it comes to just about every electronical. So I feel as if I am asking a dumb question. Anyways I have gotten my whole gameboy to work very well by studying every piece of information I could gather. The only thing that I can not get to work is the speaker I bought. I just wired it up as the diagram stated for the Helder 2.2 board. Just wondering if there is a blatant miss-step I'm taking because that could very well be the case. Thank you ! :)
Attachments
IMG_0416.JPG
IMG_0416.JPG (2.48 MiB) Viewed 6032 times

User avatar
ABH
Posts: 188
Joined: Sat May 28, 2016 7:01 pm
Location: Qatar
Has thanked: 82 times
Been thanked: 113 times

Re: Audio Question

Post by ABH » Thu Jun 14, 2018 1:03 pm

Seems everything fine here
Provide more pictures please
Raspberry pi wiring and volume wheel
And do you add this line to config.txt file ?

Code: Select all

dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4
https://sudomod.com/forum/viewtopic.php?t=480

Kmencini62
Posts: 11
Joined: Sat Apr 21, 2018 6:18 pm
Has thanked: 7 times
Contact:

Re: Audio Question

Post by Kmencini62 » Thu Jun 14, 2018 1:27 pm

I did not add that line to the config file.
Attachments
395BB923-E567-4A24-B7B2-7C4F9BA169A7.jpeg
395BB923-E567-4A24-B7B2-7C4F9BA169A7.jpeg (2.16 MiB) Viewed 6025 times
A667BE77-5247-4192-B2C4-CDFA178803FB.jpeg
A667BE77-5247-4192-B2C4-CDFA178803FB.jpeg (1.95 MiB) Viewed 6025 times

User avatar
ABH
Posts: 188
Joined: Sat May 28, 2016 7:01 pm
Location: Qatar
Has thanked: 82 times
Been thanked: 113 times

Re: Audio Question

Post by ABH » Thu Jun 14, 2018 2:01 pm

Kmencini62 wrote:
Thu Jun 14, 2018 1:27 pm
I did not add that line to the config file.
So i thing this is the problem
Add this line to your config.txt file

Code: Select all

dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4

Kmencini62
Posts: 11
Joined: Sat Apr 21, 2018 6:18 pm
Has thanked: 7 times
Contact:

Re: Audio Question

Post by Kmencini62 » Thu Jun 14, 2018 2:19 pm

Is that just done through retropie?

User avatar
ABH
Posts: 188
Joined: Sat May 28, 2016 7:01 pm
Location: Qatar
Has thanked: 82 times
Been thanked: 113 times

Re: Audio Question

Post by ABH » Thu Jun 14, 2018 2:57 pm

Kmencini62 wrote:
Thu Jun 14, 2018 2:19 pm
Is that just done through retropie?
No

Put your sd card into your computer and open the file named config.txt with a text editor add this line
at the end of that file:

Code: Select all

dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4

Kmencini62
Posts: 11
Joined: Sat Apr 21, 2018 6:18 pm
Has thanked: 7 times
Contact:

Re: Audio Question

Post by Kmencini62 » Thu Jun 14, 2018 3:09 pm

Thank you ! I appreciate the help. I will keep you updated on how it goes. Thanks again!

Kmencini62
Posts: 11
Joined: Sat Apr 21, 2018 6:18 pm
Has thanked: 7 times
Contact:

Re: Audio Question

Post by Kmencini62 » Fri Jun 15, 2018 3:16 pm

I got the audio to slightly work, but it sounds off and is very faint. could be a volume wheel problem? I'm not sure.

User avatar
ABH
Posts: 188
Joined: Sat May 28, 2016 7:01 pm
Location: Qatar
Has thanked: 82 times
Been thanked: 113 times

Re: Audio Question

Post by ABH » Fri Jun 15, 2018 3:27 pm

Kmencini62 wrote:
Fri Jun 15, 2018 3:16 pm
I got the audio to slightly work, but it sounds off and is very faint. could be a volume wheel problem? I'm not sure.
Maybe
But check the system volume first
Start > Sound setting > System volume

Kmencini62
Posts: 11
Joined: Sat Apr 21, 2018 6:18 pm
Has thanked: 7 times
Contact:

Re: Audio Question

Post by Kmencini62 » Sat Jun 16, 2018 7:40 am

Alright that did help significantly, but now it sounds like slowed down or almost like inverted? I guess that its good that were showing progress with each step at least lol.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest