Interesting Issues with Kite AIO

Having trouble with your GBZ build? Ask your questions here!
Post Reply
tedmo
Posts: 24
Joined: Mon Mar 05, 2018 1:12 pm
Has thanked: 1 time

Interesting Issues with Kite AIO

Post by tedmo » Wed Oct 10, 2018 8:59 pm

Hello!

I recently purchased two of Kite's AIO from the latest pre-order and I am having some interesting issues. The main problem is that nothing will display on the screen.

When I plug in a USB-C and press the power button, all of the appropriate lights turn on for both boards, but when I put in the Pi, things get a little weird. One of them seems to be broken somehow, but I don't know enough to explain it. I have two photos that showcase the lights:
SpoilerShow
Image
SpoilerShow
Image
As for what is displayed on the screen, one of the boards will just spaz out when everything is connected to it (screen, Pi, SD card and back panel). Lights on the Circuit Sword will blink crazily and the screen will flicker.

The other board will show a solid white screen with one of the Pis connected and a solid black screen with the other Pi connected. Weird, right? Either way, I can't get any combination of board and Pi to boot fully. Any ideas out there?

EDIT:

I added some photos of everything hooked up. Only using one board here with two different Pis, but the other board has the same reaction.
SpoilerShow
Image
SpoilerShow
Image
Last edited by tedmo on Wed Oct 10, 2018 9:45 pm, edited 1 time in total.

McGyver
Posts: 226
Joined: Tue Jan 31, 2017 11:06 am
Location: Tianjin / China
Has thanked: 25 times
Been thanked: 53 times

Re: Interesting Issues with Kite AIO

Post by McGyver » Wed Oct 10, 2018 9:35 pm

Just to ask: did you load the specific image to the SD card?

tedmo
Posts: 24
Joined: Mon Mar 05, 2018 1:12 pm
Has thanked: 1 time

Re: Interesting Issues with Kite AIO

Post by tedmo » Wed Oct 10, 2018 9:38 pm

I did, I used the one from https://github.com/kiteretro/Circuit-Sword/releases

I added two photos to the original post to hopefully show more of the issue.

McGyver
Posts: 226
Joined: Tue Jan 31, 2017 11:06 am
Location: Tianjin / China
Has thanked: 25 times
Been thanked: 53 times

Re: Interesting Issues with Kite AIO

Post by McGyver » Wed Oct 10, 2018 10:57 pm

I don't know but maybe a battery connected is mandatory for running?

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Interesting Issues with Kite AIO

Post by kite » Thu Oct 11, 2018 7:42 am

The white screen one is missing some of the power LEDs, if you remove the CM3 do those light up? And if you have a multimeter can you measure the voltages on the test holes on the other side of the board in both cases?

When you plug the SD into your PC, does it pop up as a about 58MB drive? (this is the expected behaviour if so)
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

tedmo
Posts: 24
Joined: Mon Mar 05, 2018 1:12 pm
Has thanked: 1 time

Re: Interesting Issues with Kite AIO

Post by tedmo » Thu Oct 11, 2018 10:41 am

Attached is the above board without either CM3 in.
SpoilerShow
Image
The photos of everything hooked up in my original post are actually the same board twice (I kept the tab in the top corner attached to one of the boards so I could easily tell them apart).

The other board also has all of the LEDs light up without a CM3 inserted
SpoilerShow
Image
However, the second board has a reaction after a few moments of being plugged in. The LED labelled 'BL' (located underneath where the CM3 would be positioned) begins to flash rapidly and the screen follows suit.

Not sure if I can link mp4, but here is a direct link to the video: https://imgur.com/a/FSxGiY1

I will purchase a multimeter and get you those results as soon as I can!

The SD plugged in reads 56.8 MB.

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Interesting Issues with Kite AIO

Post by kite » Thu Oct 11, 2018 12:08 pm

Hm well the LEDs are back on on both now.. the flashing backlight and LED is def a problem, this should have been caught in my testing which is a shame :|

That means your SD is good, so i'm really suspecting you may have hit this issue https://github.com/kiteretro/Circuit-Sw ... creen-only which is really unfortunate to happen to two!! It might be a good idea to email me with your full address and I'll replace those boards and sort out a return for you
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

tedmo
Posts: 24
Joined: Mon Mar 05, 2018 1:12 pm
Has thanked: 1 time

Re: Interesting Issues with Kite AIO

Post by tedmo » Thu Oct 11, 2018 1:30 pm

Email sent. Thank you!

vinomer
Posts: 54
Joined: Sat Nov 18, 2017 9:47 am
Been thanked: 17 times

Re: Interesting Issues with Kite AIO

Post by vinomer » Thu Oct 11, 2018 2:54 pm

Hey, I'm actually having a similar issue, and I do apologize for stealing your thread for my problem, I just happen to have the same thing wrong with mine.
All of the LED lights work on mine, even the yellow blinking light when removing the Micro SD card. I've tried all versions of Retropie on different SD cards... Nothing.
I checked the voltage on the back, I did get reading going from GND to the other pins (VCC, 3v3,1v8,5v). As of right now, my screen is doing the same flickering behavior as Tedmo.

https://ibb.co/c5ua3p
https://ibb.co/dv3rb9






As you can see, I'm a fan of Kites work. My KCS Lite came in yesterday, but I can't get the Circuit Sword to work.
https://ibb.co/dQ8Pw9

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Interesting Issues with Kite AIO

Post by kite » Fri Oct 12, 2018 4:21 am

Sounds similar then, could you send me an email and I'll sort out replacing your board! Everything else looks ok to me
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest