Joystick Help Thread

Having trouble with your GBZ build? Ask your questions here!
User avatar
hueblo
Posts: 175
Joined: Mon Jun 06, 2016 2:59 pm
Has thanked: 78 times
Been thanked: 81 times

Re: Joystick Help Thread

Post by hueblo » Tue Oct 30, 2018 2:59 pm

Since you are so generous with answering questions. @kite Where can I get that pcb you used for the joycon?

User avatar
kite
Posts: 943
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 242 times
Been thanked: 327 times
Contact:

Re: Joystick Help Thread

Post by kite » Wed Oct 31, 2018 4:42 am

hueblo wrote:
Tue Oct 30, 2018 2:59 pm
Since you are so generous with answering questions. @kite Where can I get that pcb you used for the joycon?
Edit: No more available, sorry. Look up 6pin 0.5mm fpc adapters

CroCop
Posts: 5
Joined: Sun Oct 21, 2018 6:19 am
Has thanked: 3 times

Re: Joystick Help Thread

Post by CroCop » Thu Aug 08, 2019 11:13 pm

Email me :) I made a whole bunch of them! The adapter is a 6pin adapter, rather than the 5pin of the joycon but it works nonetheless!
Hey Kite, do you still have those pcbs? :)

Norantio
Posts: 7
Joined: Tue Feb 06, 2018 5:15 pm

Re: Joystick Help Thread

Post by Norantio » Tue Aug 27, 2019 6:15 pm

Hello!

Long time lurker, I've recently ordered two 3DS C-Sticks, and have been doing a ton of research to look up any diagrams on them whatsoever, so far not so much. I've put this album together: https://imgur.com/gallery/MxZRyhJ , I think I've figured out the layout, but any help would be appreciated. I think, from first, top down image perspective, its X,GND,Y,Vcc. I'd really like to use these in an upcoming build I'm making.

Thoughts?

Norantio
Posts: 7
Joined: Tue Feb 06, 2018 5:15 pm

Re: Joystick Help Thread

Post by Norantio » Sat Sep 14, 2019 10:31 am

Ok, both C-sticks have arrived finally, as well as the little sockets, got two different types for testing. To get the ribbon to fit in, I had to cut the "wings" off. Perfect so far.
Attachments
20190914_095921_HDR.jpg
20190914_095921_HDR.jpg (4.19 MiB) Viewed 3265 times

ricky
Posts: 1
Joined: Sun Nov 11, 2018 4:34 am
Has thanked: 1 time

Re: Joystick Help Thread

Post by ricky » Fri Jan 17, 2020 5:09 pm

Also a long time lurker -- but did you have any luck with that? :) I was thinking of doing something similar.

Norantio
Posts: 7
Joined: Tue Feb 06, 2018 5:15 pm

Re: Joystick Help Thread

Post by Norantio » Thu Jan 23, 2020 4:21 pm

Had to take a break around the holidays but back in now. About to start testing them!

marcoball
Posts: 1
Joined: Sun Jan 26, 2020 12:51 am

Re: Joystick Help Thread

Post by marcoball » Sun Jan 26, 2020 12:54 am

Hello guys. Is there anyone that was able to find 5pin 0.5mm fpc adapters ?

How do you fix in place a 5pin flixible cable into a 6pin 0.5mm fpc adapter ?

Thanks!

User avatar
lord_of_misrule
Posts: 26
Joined: Thu Jan 31, 2019 7:44 pm
Been thanked: 5 times

Re: Joystick Help Thread

Post by lord_of_misrule » Sun Mar 29, 2020 7:05 pm

Hi,

I have a PSP 1000 that I'm using for my Circuit Sword build and I cannot seem to get it to register. I followed the instructions on the image above and still no luck. Any ideas?

Thanks!!

Clutch88
Posts: 24
Joined: Sun Apr 16, 2017 6:46 am
Been thanked: 2 times

Re: Joystick Help Thread

Post by Clutch88 » Tue Mar 31, 2020 12:53 pm

J-Malice wrote:
Wed Jun 13, 2018 12:17 pm
Honestly, I am not even sure where to begin troubleshooting my psp 1000 joystick. I used the above schematic and had 0 input from the joystick. The system didn't even register it was there. Then I looked at another users finished product thread. Looked at how they soldered the cables and then re-did mine so that they would be similar to his. Still no luck.

Is there a setting I have to enable to get joysticks to work? I lined up the 3.3V with the one from the schematic to the 3.3v connector on the SAIO. The ground is lined up an the X and Y are lined up. I am so confused right now.

Edit: In tester mode it says my joystick is OK but when I try to configure my controller when first turning on the system, it won't let me register the joystick to left joystick functions.
I had issues with that I had to connect to ssh command and recalibrate

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest