JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Show off your completed Game Boy Zero, or post your build logs here!
User avatar
papajsantos
Posts: 31
Joined: Wed Oct 24, 2018 6:35 am
Has thanked: 21 times
Been thanked: 5 times

JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by papajsantos » Sun Feb 03, 2019 3:41 am

Image

Hey there!

This is my first project, and like many people's first attempts at a new hobby, it's not going to be perfect. But while it may not be perfect, it has a lot of heart, and truly, isn't it the journey that matters more than the destination? I would like to think that for now, so I'm going to!

For this part I would like to just focus on getting things powered, then I'll start working out the USB ports and audio.

The components I'm using are:

-Raspberry Pi 3a+
-BW variant 11 3.5" composite screen,
-Banggood 5v converter,
-DIY power strip (I feel this may be the source of my problems?),
-Random power switch,
-LiPo 505060 battery (stashed in a cartridge in cartridge slot),
-Lots of hot glue,
-Lots of perf board.

The Problem:

My battery charging circuit is working and functional... I think. Before I attached the RPi to the power strip, a red status LED would show when charging, and a blue LED when it was powering something. Now, the blue light just flickers very quickly and faintly.

The RPi doesn't turn on while connected to the I don't think, and the screen doesn't either - although I don't know if that's just because it won't turn on without a signal or because I've broken something. I've probably broken something.

I assume I've done something wrong, but I don't know what. I'm hoping someone will be able to tell me!

Here are some progress photos:
SpoilerShow
Image
SpoilerShow
Image
SpoilerShow
Image
And here's a basic MS Paint diagram of my wiring right now (some components aren't to scale or have accurate placement but the wiring points are exactly as they are in my project):
SpoilerShow
Image
I hope someone out there has the forgiveness to not hate me for everything I've done so poorly here, and the grace to show me the way.

Thanks! :D :D :D
Builds:
JankyBoy V1 - worklog
Freeplay CM3 w/ Dual Thumbsticks and L2/R2 - showcase
Infinity Sword (Kite's Circuit Sword Lite x Thanos's Infinity Gauntlet) - coming soon
-------------------------------
"Romans, they go the house?!"

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by VeteranGamer » Sun Feb 03, 2019 4:21 am

Thanks for the definition....
I'm sure most people know what Janky means :) (but thanks anyway)

however...
I think/feel (IMHO), that your selling yourself short here....

your done good....
and to be really honest....
it doesn't really matter what it looks like inside (I say that with a pinch of salt)
as long as everything works



for me (and this is gonna ruffle a few feathers/shake a few snowflakes)....
this is way better than most Kite Circuit Sword builds out there (and this is not a knock at the CSO or anyone)

you've actually put a build from scratch together (which in my book notches it above those)

I see people high five themselves just by putting a pre-built AIO into a shell and picking some fancy buttons
thinking they've knocked it out of the park (again this is MHO, please NO one get upset)

but to build from scratch, shows alot more skill (however it turns out)


you've done good....
and I'm looking forward to the next project
(even thou its a CSO lite, ignore what I mentioned earlier :oops: )




.

User avatar
papajsantos
Posts: 31
Joined: Wed Oct 24, 2018 6:35 am
Has thanked: 21 times
Been thanked: 5 times

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by papajsantos » Sun Feb 03, 2019 4:56 am

VeteranGamer wrote:
Sun Feb 03, 2019 4:21 am
Thanks for the definition....
I'm sure most people know what Janky means :) (but thanks anyway)
I thought of it like that fade in quote at the start of a movie, or a preface in a book :lol:
Builds:
JankyBoy V1 - worklog
Freeplay CM3 w/ Dual Thumbsticks and L2/R2 - showcase
Infinity Sword (Kite's Circuit Sword Lite x Thanos's Infinity Gauntlet) - coming soon
-------------------------------
"Romans, they go the house?!"

User avatar
correia5022
Posts: 202
Joined: Mon Dec 05, 2016 12:32 am
Location: Portugal
Has thanked: 17 times
Been thanked: 38 times

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by correia5022 » Sun Feb 03, 2019 10:46 am

papajsantos wrote:
Sun Feb 03, 2019 3:41 am

The Problem:
Hi, and welcome.
According to your wiring, it should work.
But that banggood pcb behavior is not normal.. the blue led should be on constantly.
So, a) maybe all system is consuming a lot of current and the power module cant handle it
b) maybe fried some component on the power module, and its behaving wirdly

Also, i would put some kapton or electrical tape under the screen pcb, not to be directly in contact with the metalic parts ( cant see if you did, so sorry if you had done it)
________________________________________
Starting on electronics :)
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website

User avatar
infinitLoop
Posts: 536
Joined: Mon Dec 24, 2018 11:46 am
Location: Portland, OR
Has thanked: 222 times
Been thanked: 199 times
Contact:

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by infinitLoop » Sun Feb 03, 2019 3:06 pm

hi. i just finished my 3a+ build, and I think your issue with the pi/screen not turning on is the current. i was trying the adafruit powerboost and when it did boot, it would give me the undercurrent warning. i swapped it for Helder's PSU and that works way better. the a+ wants like 2500mah and those powerboosts just can't push that, plus the screen and accessories.

User avatar
infinitLoop
Posts: 536
Joined: Mon Dec 24, 2018 11:46 am
Location: Portland, OR
Has thanked: 222 times
Been thanked: 199 times
Contact:

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by infinitLoop » Sun Feb 03, 2019 3:08 pm

correia5022 wrote:
Sun Feb 03, 2019 10:46 am

Also, i would put some kapton or electrical tape under the screen pcb, not to be directly in contact with the metalic parts ( cant see if you did, so sorry if you had done it)
i think this has happened to me on like 4 screens.... i'm having the hardest time getting screens to work right now. it's maddening. i bought a bunch of those bw screens on sale for like 10 bucks, but man, i can't figure out what i'm doing to them, and now i need to get some fresh ones again so i can at least have ones i know should work... ugh

User avatar
infinitLoop
Posts: 536
Joined: Mon Dec 24, 2018 11:46 am
Location: Portland, OR
Has thanked: 222 times
Been thanked: 199 times
Contact:

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by infinitLoop » Sun Feb 03, 2019 3:50 pm

another thing to try... if you can, get a powerful adapter, like the official pi one that puts out 2.5A - plug that directly into the pi. you should be able to power everything like that, if it's the psu that is the issue.

i ended up somehow shorting the 3.3v on mine :( and couldn't figure out why it stopped booting up, until i was going thru the "is your pi dead" checklist, and tested the 3.3 and got like nothing. apparently no coming back from that.

User avatar
papajsantos
Posts: 31
Joined: Wed Oct 24, 2018 6:35 am
Has thanked: 21 times
Been thanked: 5 times

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by papajsantos » Sun Feb 03, 2019 6:44 pm

correia5022 wrote:
Sun Feb 03, 2019 10:46 am
Also, i would put some kapton or electrical tape under the screen pcb, not to be directly in contact with the metalic parts ( cant see if you did, so sorry if you had done it)
I have some sneaky perf board and hot glue behind the screen pcb, nothing should be shorting there. I originally forgot to put anything behind there so that was fun trying to remove it without breaking anything :oops:
Builds:
JankyBoy V1 - worklog
Freeplay CM3 w/ Dual Thumbsticks and L2/R2 - showcase
Infinity Sword (Kite's Circuit Sword Lite x Thanos's Infinity Gauntlet) - coming soon
-------------------------------
"Romans, they go the house?!"

User avatar
papajsantos
Posts: 31
Joined: Wed Oct 24, 2018 6:35 am
Has thanked: 21 times
Been thanked: 5 times

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by papajsantos » Sun Feb 03, 2019 6:46 pm

infinitLoop wrote:
Sun Feb 03, 2019 3:06 pm
i swapped it for Helder's PSU and that works way better. the a+ wants like 2500mah and those powerboosts just can't push that, plus the screen and accessories.
Hmm... this may be my problem. The PSU did seem to work before I attached the Pi so this all makes sense.

Time to give Helder my next paycheck I guess.
Builds:
JankyBoy V1 - worklog
Freeplay CM3 w/ Dual Thumbsticks and L2/R2 - showcase
Infinity Sword (Kite's Circuit Sword Lite x Thanos's Infinity Gauntlet) - coming soon
-------------------------------
"Romans, they go the house?!"

User avatar
papajsantos
Posts: 31
Joined: Wed Oct 24, 2018 6:35 am
Has thanked: 21 times
Been thanked: 5 times

Re: JankyBoy v1 (Piecemealed GameBoy 3a+ Project)

Post by papajsantos » Sun Feb 03, 2019 6:47 pm

May I just say that no one has ragged on me for the powerstrip and I'm not sure why not...
Builds:
JankyBoy V1 - worklog
Freeplay CM3 w/ Dual Thumbsticks and L2/R2 - showcase
Infinity Sword (Kite's Circuit Sword Lite x Thanos's Infinity Gauntlet) - coming soon
-------------------------------
"Romans, they go the house?!"

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest