I have already replaced my pi, twice actually, problem remains. I have trouble shutting down with the button from time to time as well. Its weird as hell. When its powered on it works like a dream. Just shutting the damn thing off is a nightmare.NeonJesterface wrote: ↑Sat Jun 01, 2019 3:57 amI'm completely stumped here, should I try and reflow anything? or try replacing the pi?
V3 20190501 Can't shutdown?
Re: V3 20190501 Can't shutdown?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: V3 20190501 Can't shutdown?
But wasn't your board the one you kind of messed up desoldering the wrong chip? It's likely something that got damaged with the process of desoldering. The board did look horrible when you did that so not sure what got damaged in the process.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
-
- Posts: 18
- Joined: Thu Apr 04, 2019 5:26 pm
- Has thanked: 3 times
Re: V3 20190501 Can't shutdown?
This is all correct, I had the whole thing put together and yep, just wont finish the shutdown properly, I think its really weird that we're the only two people with this issue, with slightly different degrees of not shutting downLilTrublMakr wrote: ↑Sun Jun 02, 2019 3:01 pmJust to make sure:
You are using the power board and off battery. When triggering the halls sensor, it goes through the process but does not cut the power? And the power button turns it on but won't turn it off when held?
-
- Posts: 18
- Joined: Thu Apr 04, 2019 5:26 pm
- Has thanked: 3 times
Re: V3 20190501 Can't shutdown?
I sent my board to you for desoldering and replacing the only thing that I've known was an issue. I mean I've desoldered and resoldered the shoulder button board a few times because I had it together before I had to send my power board, and then I had it attached at a funky angle, does that mean I might need to replace the same thing on the power board? Thats the only thing close enough I can think I could've damaged
EDIT: My mistake, didn't click in my head you were talking about their button pcb
Re: V3 20190501 Can't shutdown?
After some troubleshooting with a few different power boards (all in various stages of updating with the dualfets), Im pretty sure I have nailed down the cause of this. It seems as though they are not all the same. I have no idea what would make them different, but I bought a batch from Ebay https://www.ebay.com/itm/5pcs-SI4562DY- ... 2749.l2649 and every power board I update with this particular chip has the not shutting down problem. When I hook the controller board/pi combos to the power board that Wermy built, they all shut down just fine with both the hall sensor and button. I also hooked up all the combos to the old version of the power board (pre-dualfet swap), they also all shut down just fine both ways. I currently have a batch on the way from LilTrublMklr, which I think we are guaranteed will work. Ill swap them again when I get his and hopefully all is resolved.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: V3 20190501 Can't shutdown?
Wonder if they somehow sent you the wrong ones? can you read the numbers on the ones you actually have? Maybe bad clones.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
- LilTrublMakr
- Posts: 365
- Joined: Sun Aug 05, 2018 6:39 am
- Has thanked: 24 times
- Been thanked: 120 times
- Contact:
Re: V3 20190501 Can't shutdown?
That looks like 4582 instead of 4562 to me. That might be what is going on. You should have gotten the ones I sent by now.
@LilTrublMakr
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
Re: V3 20190501 Can't shutdown?
Haven't gotten them yet. Hopefully tomorrow. Depends on which one you look at. Ok some the 6 is more clear.
Who is online
Users browsing this forum: No registered users and 1 guest