V3 Function Key + on-screen menu
V3 Function Key + on-screen menu
Having completed my V3 MintyPi, I am really loving the on-screen function menu (the one with volume, WiFi, battery indicators etc.). However, I would like to know more about it. In one of the videos Wermy mentions this functionality was ported from a Gameboy FE project "Bloop's script"??? I am happing digging in with my own research, but since I am not familiar with this user or the FE project, where do I get started?
I am curious about the tiny icons:
battery indicator
Wifi indicator
I have also seen what looks like a tiny white dot with "j" inside superimposed on my screen at the top. What is that?
Then there is the function key functions. Are there more than meets the eye undocumented? Can we augment this functionality? For example, I added scripts to my RetroPie menu to enable+start and disable+stop samba sharing. That might be nice to do via function key. Or, here is a GREAT one: setup a function key combo to issue the "esc" key. This would be super useful (graceful exit) for non-libretro emus which are often faster than their retroarch counterparts--so important on slower hardware like the zero.
Anyway, I did some searching and did not find much detail, so I thought I would stimulate some discussion.
I am curious about the tiny icons:
battery indicator
Wifi indicator
I have also seen what looks like a tiny white dot with "j" inside superimposed on my screen at the top. What is that?
Then there is the function key functions. Are there more than meets the eye undocumented? Can we augment this functionality? For example, I added scripts to my RetroPie menu to enable+start and disable+stop samba sharing. That might be nice to do via function key. Or, here is a GREAT one: setup a function key combo to issue the "esc" key. This would be super useful (graceful exit) for non-libretro emus which are often faster than their retroarch counterparts--so important on slower hardware like the zero.
Anyway, I did some searching and did not find much detail, so I thought I would stimulate some discussion.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: V3 Function Key + on-screen menu
Search Github for OneForAll all the info is there and the J is indication of analog joystick which is not used in this version since the mintyPi doesn't have an analog stick.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
- dryja123
- Posts: 1076
- Joined: Tue May 09, 2017 5:34 pm
- Location: Central NJ
- Has thanked: 239 times
- Been thanked: 553 times
Re: V3 Function Key + on-screen menu
If you want to get rid of it connect your mintyPi to WiFi and select update mintyPi in the retropie menu. I brought this to Bluups attention and he fixed it.
Guide for troubleshooting mintyPi power problems: http://www.sudomod.com/forum/viewtopic.php?f=34&t=4115
My mintyPi builds: http://www.sudomod.com/forum/viewtopic.php?f=32&t=3985
My mintyPi builds: http://www.sudomod.com/forum/viewtopic.php?f=32&t=3985
Re: V3 Function Key + on-screen menu
I will update, but I may check settings first. What I really want to do is add a function to send “ESC” so I can exit some of the faster emulators that are independent of retroarch.
I checked the git repo and I have to say I am impressed with the hardware/software marvel we have in our hands. Well done!
I checked the git repo and I have to say I am impressed with the hardware/software marvel we have in our hands. Well done!
Re: V3 Function Key + on-screen menu
Well, I did a bit of digging around in the git repo and my own config files. It seems to be a little too daunting for me to add function key mapping on my own. Does anyone know if Bluup might be open to suggestions about this? It seems like there are many opportunities for leveraging the function button in combination with other buttons. I know several are taken, but having a config file for hotkeys like this makes a lot of sense. I mean, we have this great input capability but it only gets leveraged for save states, volume and networking. I would love to see a way to map Function+button where “button” can include the unused buttons. For example:
1. Function+START= “ESC”
2. Function+SELECT= “TAB”
3. Function+L and R =adjust display brightness if there are driver commands to do so
4. Function to enable/disable SMB (once installed)
Does anyone have other ideas?
1. Function+START= “ESC”
2. Function+SELECT= “TAB”
3. Function+L and R =adjust display brightness if there are driver commands to do so
4. Function to enable/disable SMB (once installed)
Does anyone have other ideas?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: V3 Function Key + on-screen menu
I passed the message along to Bluup but you can also register an issue on the github so he can get it directly and respond there.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
-
- Posts: 144
- Joined: Wed Mar 28, 2018 9:40 am
- Has thanked: 9 times
- Been thanked: 82 times
- Contact:
Re: V3 Function Key + on-screen menu
If you could post this as an issue that'd be awesome. I have had some ideas regarding this but it requires a few major modifications, which I'm happy to do, but will need some testing afterwards. I'm trying to strike a balance between ease of use and advanced features like adding extra hotkey combos. It can definitely be done, just the best way of doing it.
Re: V3 Function Key + on-screen menu
It has been a while since I tried getting into this, but is there a recommended process for updating the allforone software on a V3 mintypi? I think last time I checked the answer was no, not for MintyPi. But with the Lite version now, maybe an update works on the V3?
I’d like to try setting up a combo hotkey for ESCAPE to exit out of some non-libretro native emulators. I think newer versions of allforone can do this with a keysKeyboard.cfg, but I dont want to break the working gpio mapping on a V3 mintypi, i just want to add additional combo keys. So i guess i am looking for an update procedure that works, if anyone has tried it, plus a .cfg that aligns with exiting V3 functions (controls, OSD, Volume etc.) so i can tinker from there.
I’d like to try setting up a combo hotkey for ESCAPE to exit out of some non-libretro native emulators. I think newer versions of allforone can do this with a keysKeyboard.cfg, but I dont want to break the working gpio mapping on a V3 mintypi, i just want to add additional combo keys. So i guess i am looking for an update procedure that works, if anyone has tried it, plus a .cfg that aligns with exiting V3 functions (controls, OSD, Volume etc.) so i can tinker from there.
Who is online
Users browsing this forum: No registered users and 1 guest