VolumeControl::init() - Failed to find mixer elements!
That is the error I am receiving on top of not having any volume from games or in menus. I found this thread discussing the issue about retropie = https://github.com/Aloshi/EmulationStation/issues/433
And it is a little confusing but I think I get the gist of it. My question, would recompiling the retropie source like they recommend have any adverse affect on the mintypi specific changes made to the software? Is it even possible for me to do this? It is there a simpler solution to this I am not seeing?
Thanks for any help.
Sound error code
- dryja123
- Posts: 1076
- Joined: Tue May 09, 2017 5:34 pm
- Location: Central NJ
- Has thanked: 239 times
- Been thanked: 553 times
Re: Sound error code
If your sound card is connected properly, and is in good working condition, it should work when you play a game. I would reflash your SD card with the mintyPi image. If that doesn't work check your connections and try a new card if it doesn't work.
Guide for troubleshooting mintyPi power problems: http://www.sudomod.com/forum/viewtopic.php?f=34&t=4115
My mintyPi builds: http://www.sudomod.com/forum/viewtopic.php?f=32&t=3985
My mintyPi builds: http://www.sudomod.com/forum/viewtopic.php?f=32&t=3985
Re: Sound error code
Hi all,
I'm putting together a recently recieved V3 and I'm getting this error as well.... VolumeControl::init() - Failed to find mixer elements!
No sound in menu or game. All connections seem to be ok. Could it be a bad speaker? In the menu for audio, it defaults to PCM and when putting it to speaker, the volume is at 0% and after cranking it up to 100% and leaving the menu and coming back to the menu, it's back at 0% again. Anytime a audio event is supposed to happen, it shows that error.
I issued this at the terminal also... sudo chown -R pi:pi /opt/retropie/configs
Thanks for any info. I'm an older guy that likes to tinker with this stuff, but my hands and eyes are failing me. I may have to have someone check this for me if I can't get it figured out. Everything else seems to work.
Scott
I'm putting together a recently recieved V3 and I'm getting this error as well.... VolumeControl::init() - Failed to find mixer elements!
No sound in menu or game. All connections seem to be ok. Could it be a bad speaker? In the menu for audio, it defaults to PCM and when putting it to speaker, the volume is at 0% and after cranking it up to 100% and leaving the menu and coming back to the menu, it's back at 0% again. Anytime a audio event is supposed to happen, it shows that error.
I issued this at the terminal also... sudo chown -R pi:pi /opt/retropie/configs
Thanks for any info. I'm an older guy that likes to tinker with this stuff, but my hands and eyes are failing me. I may have to have someone check this for me if I can't get it figured out. Everything else seems to work.
Scott
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Sound error code
I would double check the 5v point and the 3 audio gpio for proper continuity. If any of those 4 points have a bad connection audio will not work.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: Sound error code
Thanks, checked those and all appears to be ok.
It would appear that I buggered the speaker itself by mistakenly connecting to the inner pads and then changing it to the outer pads as it should be and possibly somehow damaging the tiny wire that I can't see there. Tried a GBZ speaker I had and it works now, although that error still happens between selecting/returning from a Retropi option as well as when starting a game. VolumeControl::init() - Failed to find mixer elements!
A suggestion for future versions, possibly move the speaker connections on the board so that when assembled, the pads of both the speaker and board aren't right on top of each other leaving a very close to no gap between them.
Ordered a couple replacement speakers off EBay.
Scott
It would appear that I buggered the speaker itself by mistakenly connecting to the inner pads and then changing it to the outer pads as it should be and possibly somehow damaging the tiny wire that I can't see there. Tried a GBZ speaker I had and it works now, although that error still happens between selecting/returning from a Retropi option as well as when starting a game. VolumeControl::init() - Failed to find mixer elements!
A suggestion for future versions, possibly move the speaker connections on the board so that when assembled, the pads of both the speaker and board aren't right on top of each other leaving a very close to no gap between them.
Ordered a couple replacement speakers off EBay.
Scott
Who is online
Users browsing this forum: No registered users and 1 guest