Unfortunately I couldn't get an AIO board as shipping to NZ is pretty expensive, so most parts will be coming from aliexpress.
Please let me know if anyone spots something that I've obviously missed!
These are the parts I've ordered so far:
- Case - Gameboy DMG case with buttons etc https://www.aliexpress.com/item/4001165 ... c4dhLB83je
- Power Module - No idea how to connect this yet https://www.aliexpress.com/item/3289968 ... 4c4dhLB83j
- Audio Amplifier - No idea how to connect this yet https://www.aliexpress.com/item/3227396 ... 4c4dhLB83j
- Volume Switch/Wheel - https://www.aliexpress.com/item/3270162 ... 4c4dhLB83j
- Lens Protector - https://www.aliexpress.com/item/3286876 ... 4c4dhLB83j
- Display - 3.5" TFT LCD display - https://www.aliexpress.com/item/3289174 ... 4c4dhLB83j
- Other - SNES replica - Button inserts behind the buttons - https://www.aliexpress.com/item/3286390 ... 4c4dhLB83j
- L & R buttons - 9mm tactile switches - https://www.aliexpress.com/item/3280827 ... 4c4dhLB83j
- Micro-USB port - For charging - https://www.aliexpress.com/item/4000806 ... 4c4dhLB83j
- On/Off switch - https://www.aliexpress.com/item/3269424 ... 4c4dhLB83j
- Headphone jack - https://www.aliexpress.com/item/1005002 ... 4c4dhLB83j
Micro-SD card cartridge adaptor from prerunnerseth or aliexpress
USB ports from aliexpress
DS-Lite GBA cartridge readers from aliexpress
Cartridge label from Dominator or aliexpress
Aftermarket cartridge shell from kitsch-bent or aliexpress
3D-Printed screw bracket by wermy - Are there STL files available for these? I don't own a 3D printer, but maybe I can take it to a nearby shop or get it done online?
3D-Printed button wells by wermy - Are there STL files available for these? I don't own a 3D printer, but maybe I can take it to a nearby shop or get it done online?
JST battery extension cable from Adafruit
Ferrite beads potentially to stop RF radio interference - Unsure if needed?
GPIO PWM Audio for Raspberry Pi Zero
150 Ohm resistor, 270 Ohm resistor, 10nF capacitor, and a 33nF capacitor (another 10nF will work fine as well if that’s easier to find)