sudomod

Auto-respond, i receive my WiiU shell, impossible to fit a 7" screen.

I receive my TOUCH SCREEN DIGITIZER, and little problem.... i haven't the bezel. Not on my shell, not with the screen.



Thanks to all

Marty33 wrote: ↑

Wed May 31, 2017 11:29 am

Auto-respond, i receive my WiiU shell, impossible to fit a 7" screen.

I receive my TOUCH SCREEN DIGITIZER, and little problem.... i haven't the bezel. Not on my shell, not with the screen.



Thanks to all

You might need to re-order this

http://www.ebay.com/itm/162251255451?_t ... EBIDX%3AIT

There is 3 screen ?

I receive this : https://goo.gl/80x0Sf

There is LCD > screen digitizer > touch screen ?

Just two, it's a touch screen/digitizer.

llonden wrote: ↑

Sat May 27, 2017 11:46 am

What settings were used in Retropie's config.txt file to get the entire display to fit on the 6.5" screen?

config.txt

#HDMI Display
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0

hi,
i finally bought almost all of the parts and start building.

@banjokazooie, could you share a drawing of that part you used to mount all the elements (the brown panel seen on your pics)?

also I don't have any small screws, could you advise me what size should I buy?

i found this set:
https://pl.aliexpress.com/item/250pcs-M ... 18629.html
is it ok?

@yemu give feedback of your project or create new post

I wait my different parts too and i made this fantastic project !

Waiting now only for the Charger, than i have all parts to continue

Did you de-solder that Pi3 yourself?
It looks very clean in that image, well-done mate.

gilbertotron wrote: ↑

Thu Jun 08, 2017 2:33 am

Did you de-solder that Pi3 yourself?
It looks very clean in that image, well-done mate.

Yes, I did it myself. With the help of Desoldering Wick (In German we call "Entlötlitze"). Of course, you do not suck 100% everything up. But it has helped a lot. After that I cleaned it with isopropanol.