USB Audio works on PC, static noise on raspberry

[Pingu69]

Hello,

when I connect my Audio with setup (usb dac, amp, speaker) to my PC, it works perfectly. When I connect it to my raspberry, I only hear static noise. I set my sound card as default already.

Anything I could try?

[VeteranGamer]

Hello,

when I connect my Audio with setup (usb dac, amp, speaker) to my PC, it works perfectly. When I connect it to my raspberry, I only hear static noise. I set my sound card as default already.

Anything I could try?

could you show (with images ideally) what your setup is (how you have it wired up)

also when you say "set my sound card as default", what have you actually done.....


.

[tinkerBOY]

Follow the instructions I put on http://www.tinkerboy.xyz/retropie-raspb ... nd-device/ and let me know if that fix it.

[Pingu69]

could you show (with images ideally) what your setup is (how you have it wired up)

also when you say "set my sound card as default", what have you actually done.....

Here is a schematic: https://i.imgur.com/QbdTAir.png

I used this guide to set it as default:

https://www.sudomod.com/forum/viewtopic.php?f=20&t=144

When i am in emulationstation I hear nothing, when I use aplay example.mp3 i hear a load static noise

[VeteranGamer]

could you show (with images ideally) what your setup is (how you have it wired up)

also when you say "set my sound card as default", what have you actually done.....

Here is a schematic: https://i.imgur.com/QbdTAir.png

I used this guide to set it as default:

https://www.sudomod.com/forum/viewtopic.php?f=20&t=144

When i am in emulationstation I hear nothing, when I use aplay example.mp3 i hear a load static noise

Try the setup that TinkerBoy has provided (via his link)...

It's a little simpler to setup, and is more up to date...

.

[Pingu69]

Try the setup that TinkerBoy has provided (via his link)...

It's a little simpler to setup, and is more up to date...

.

I did and it changed nothing

[VeteranGamer]

Try the setup that TinkerBoy has provided (via his link)...

It's a little simpler to setup, and is more up to date...

.

I did and it changed nothing

thats a bit strange....

i would suspect it might possibly be your wiring (if you setup the software side of it up)
without actually seeing how you've wired it up that cant be ruled out (actual pics of your setup)
(how are you powering the amp)
(and how is the USB connection to the Pi)

last resort would be.....
to start with a fresh install of Retropie, and try setting up the audio again (but thats a last resort)
(but this would be pointless, if the wiring is still no correct)


.

[tinkerBOY]

Try the setup that TinkerBoy has provided (via his link)...

It's a little simpler to setup, and is more up to date...

.

I did and it changed nothing

Was it detected by your pi?

[Pingu69]

Ok, so I bought a new Raspberry and a new USB Audio card, still I have the same problem. The Audio is connected with an OTG cable to the raspberry's micro usb port;

I just don't know what the problem could be? When I research, I found most people's card say "C-media", mine says "Intel Corp.". I don't know if I maybe need something like driver for that?

Any help is appreciated

[Pingu69]

Any help? It would help if someone could check what Audio his build has, if it's 'Intel Corp' or something else, also where you bought your USB Audio would help as well