Change 3.5" HDMI display boot logo

Discussion about other hardware (including other Pi-like boards)
floppes
Posts: 19
Joined: Thu Apr 19, 2018 5:58 am
Has thanked: 1 time
Been thanked: 21 times

Change 3.5" HDMI display boot logo

Post by floppes » Fri Jul 13, 2018 2:37 pm

I am using the 3.5" HDMI display from KeDei for my Game Boy Zeros. It has always annoyed me that it boots with a blue screen and the manufacturer's logo:
1.png
1.png (434.9 KiB) Viewed 1069 times
The board contains a Realtek RTD2662 display controller. I found some firmwares and source code for this controller on the net and figured out how the boot logo is encoded within the firmware. The firmware is stored on an SPI flash chip on the board which can be programmed externally through the I2C pins of the HDMI connector. I wrote an Arduino sketch and a Windows tool (should also work with Mono on Linux/Mac) to modify the firmware and embed your own custom logo. The logo is limited to two colors and 204x72 pixels. You can also disable the "HDMI" pop-up message or change it's text.

This is how I changed it:
2.png
2.png (530.46 KiB) Viewed 1069 times
You can find the project source code and more info on Github: https://github.com/floppes/RTD266xFlash

I hope this is useful for others as well 8-)

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2359
Joined: Thu May 05, 2016 8:33 am
Location: Fall River, MA
Has thanked: 1249 times
Been thanked: 2880 times

Re: Change 3.5" HDMI display boot logo

Post by Helder » Fri Jul 13, 2018 4:30 pm

Awesome work!Thanks for sharing.
My Sale Threads:

Retro PSU, 3.5A output!


Chat with me and other members


Don't contact me about obtaining my board files (as you will not get them). Don't contact me about any of my boards if they are sold out, they will be restocked as soon as I can get them.


Don't support thieves like ckliang who copied my AIO to resell and is now cloning the mintyPi, support the original creators and not the thieves!

McGyver
Posts: 157
Joined: Tue Jan 31, 2017 11:06 am
Location: Tianjin / China
Has thanked: 19 times
Been thanked: 31 times

Re: Change 3.5" HDMI display boot logo

Post by McGyver » Fri Jul 13, 2018 8:24 pm

Amazing! Thank you for your investigatin and sharing.

User avatar
VeteranGamer
Posts: 1363
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 400 times
Been thanked: 716 times

Re: Change 3.5" HDMI display boot logo

Post by VeteranGamer » Sat Jul 14, 2018 2:04 am

really great stuff, thanks.........

i've got a couple of these screen that i was planning on using again in a Gameboy build....


thanks...






.

User avatar
tinkerBOY
Posts: 559
Joined: Tue May 30, 2017 4:00 am
Has thanked: 265 times
Been thanked: 159 times

Re: Change 3.5" HDMI display boot logo

Post by tinkerBOY » Sat Jul 14, 2018 3:58 am

wow thank you for sharing! I like the kedei screen and used it on my previous Pi3 build but i must admit i don't like seeing the 'KEDIE' logo.

User avatar
BadBert
Posts: 375
Joined: Wed Jun 29, 2016 4:14 am
Location: Hoogerheide, Netherlands
Has thanked: 99 times
Been thanked: 59 times
Contact:

Re: Change 3.5" HDMI display boot logo

Post by BadBert » Tue Aug 21, 2018 1:08 am

this is just awsome!
I will be using this on my current build!!
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!

User avatar
erik_gee
Posts: 347
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 134 times
Been thanked: 179 times

Re: Change 3.5" HDMI display boot logo

Post by erik_gee » Tue Aug 21, 2018 1:43 am

Hey I saw you share this on the zeroboy page a while back! Looks like everything has been going good. Awesome stuff, that KS for sharing it with the community
Bunch of different shoulder button kits Sales Thread:https://sudomod.com/forum/viewtopic.php ... 192#p63192

AIO board for DMG Sales Thread:
https://sudomod.com/forum/viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: https://sudomod.com/forum/viewtopic.php?f=38&t=4811

User avatar
Marty33
Posts: 129
Joined: Wed Feb 22, 2017 4:55 pm
Has thanked: 17 times
Been thanked: 10 times

Re: Change 3.5" HDMI display boot logo

Post by Marty33 » Thu Aug 30, 2018 2:34 am

I'm going to go ahead with this modification. It's must have !

I have a version 1.1 2018/5/8.

I can i do to know the type (SKYxxxxxx-xxx) ?

Big thanks

floppes
Posts: 19
Joined: Thu Apr 19, 2018 5:58 am
Has thanked: 1 time
Been thanked: 21 times

Re: Change 3.5" HDMI display boot logo

Post by floppes » Thu Aug 30, 2018 2:41 am

Is the type (SKYxxx...) listed on the Github site?

A few days ago I had a panel from 2018 with the number SKY035S13E-180. It is not yet supported, but I am working on it and will update the project site.

floppes
Posts: 19
Joined: Thu Apr 19, 2018 5:58 am
Has thanked: 1 time
Been thanked: 21 times

Re: Change 3.5" HDMI display boot logo

Post by floppes » Thu Aug 30, 2018 2:40 pm

I have updated the project and included the new display type. Connection problem detection has been improved as well. The GUI will now tell you what went wrong with the connection.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests