Safe Shutdown v2.0

If you'd like to gauge interest in an idea before putting it into production, do it here!

Interested in Safe Shutdown v2.0 with battery monitoring?

Yes
18
82%
No
0
No votes
Maybe
4
18%
 
Total votes: 22

User avatar
infinitLoop
Posts: 282
Joined: Mon Dec 24, 2018 11:46 am
Has thanked: 109 times
Been thanked: 76 times
Contact:

Re: Safe Shutdown v2.0

Post by infinitLoop » Fri Feb 08, 2019 10:32 am

VeteranGamer wrote:
Thu Feb 07, 2019 3:00 am
Camble wrote:
Wed Feb 06, 2019 1:29 pm
The switch for the PowerBoost edition should work with your PSU to initiate a shutdown
is this the current powerboost edition board
and if so...
any idea how this should be wired up.....
(if it is,its just the LBO, that is throwing me off)


or this going to be the case for the new revisions....
yeah, i ditched it on my recent build too since it wasn't obvious how to hook it up, but figured the psu battery monitor was good enough, with a tactile switch to the gpio to trigger a safe s/d. it would be nice to have that switch to do the powerdown instead, and save that extra bit.

User avatar
Camble
Posts: 876
Joined: Thu May 05, 2016 2:31 am
Location: Scotland
Has thanked: 269 times
Been thanked: 487 times

Re: Safe Shutdown v2.0

Post by Camble » Sat Feb 09, 2019 11:49 am

VeteranGamer wrote:
Thu Feb 07, 2019 3:00 am
is this the current powerboost edition board
and if so...
any idea how this should be wired up.....
(if it is,its just the LBO, that is throwing me off)
This is the Generic/BangGood one but I would also like to replace LBO on the PowerBoost edition with an ADS1015

Ziploc99
Posts: 26
Joined: Sun Jun 17, 2018 10:02 am
Has thanked: 16 times
Been thanked: 6 times

Re: Safe Shutdown v2.0

Post by Ziploc99 » Tue Feb 26, 2019 8:42 am

I think what Veteran is saying, is a way to simplify the below image. Merlin worked out a way to add an ads1105 with your Safe Shutdown board. That way he had batt monitoring and changed the script so the safe shutdown triggered with flipping the switch. I would also be interested in this as it nice to have that shutdown script on demand at the switch (not a separate button/combo of buttons). Ignoring all the other parts of this diagram (helder pcb, screen, sd card), something that incorporates the shutdown pcb, ads and powerboost like this:
Attachments
IMG_0822.JPG
IMG_0822.JPG (939.23 KiB) Viewed 1136 times

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests