Pad PP 23 came off, can't attach USB

Grife · Post by **Grife** » Sat Aug 20, 2016 1:16 pm

So my first Targus USB hub I couldnt get working, and when I de-soldered the white wire from my pi zero, the PP pad came off. Are there any alternative ways to connect my teensy to the the pi zero? I was considering just soldering it to a male micro USB and plugging it in, but that seems clumsy.

Also, getting a USB hub to reliably work has been a headache, how crucial is it? Why not just hook my teensy right up to the pi?

Camble · Post by **Camble** » Sat Aug 20, 2016 4:00 pm

You can carefully scrape the solder mask away from the trace and solder directly to it. Use some hot glue to support the connection.

RxBrad · Post by **RxBrad** » Sun Aug 21, 2016 5:48 pm

Couldn't you just plug in a micro USB cable to the Zero, and solder the wires inside it to the hub?

Camble · Post by **Camble** » Mon Aug 22, 2016 1:22 pm

You can also remove the microUSB connector entirely, but it's not easy and you risk more damage.

Grife · Post by **Grife** » Wed Aug 24, 2016 7:04 pm

RxBrad wrote:Couldn't you just plug in a micro USB cable to the Zero, and solder the wires inside it to the hub?

That's what I ended up doing, but I dont like it. Also, I still cant get any USB hub to work. Every thing is hooked up correctly and not touching anything, I've checked everything for days and tried 2 different Targus hubs. Do Targus hubs just not work on 1.3?

Pad PP 23 came off, can't attach USB

Pad PP 23 came off, can't attach USB

Re: Pad PP 23 came off, can't attach USB

Re: Pad PP 23 came off, can't attach USB

Re: Pad PP 23 came off, can't attach USB

Re: Pad PP 23 came off, can't attach USB

Who is online