Wii U - Raspberry - WiP

[Marty33]

I made an assembly of different parts.

I am based on this topics :
- viewtopic.php?f=20&t=2285&p=23956#p23956 for the Teensy 2.0 final script of @ZarkWizard
- viewtopic.php?f=13&t=1607 with the diagram of @banjokazooie

I mix all, i read the script and i made this...


If you see errors, say it, i would correct. If you have suggestions, do not be shy

[reke]

i think its fine, have you wired all the pins??

[YaYa]

Marty33, are you french ?

[Marty33]

@reke, for the moment, i wait an element for my batteries. I made photos when is arrived.

@Yaya, je suis français en effet

[YaYa]

Hehe, j'en étais sûr. Tu écris l'anglais comme du français dans les tournures de phrases, c'est ca qui t'as démasqué

[Marty33]

Je me doutais que tu n'étais pas un Anglophone non plus.

Tu peux donc venir pour me remercier pour le lien sur les ventilateurs

[YaYa]

C'est clair qu'il défonce ton lien

Tu es d'où ? Je suis à Pau, 64.

[Marty33]

Hello all.

I received simple part but very important : 3D print for my battery.

Very very (terribly !!!!!) complicated to found the good place. I cut small part, but it's work. Everything is in its place.

Now, the more complicated is past, I will be able to start solder the elements of the controls on the teensy.

I advance, I advance ... it's hard.

[YaYa]

Are they 18650 batteries ?
You have Simon Design on 3DHubs. They make great printing, very cheap, and they are located in Bordeaux

[Marty33]

Yes, founded on Amazon and the 3D printer on.... Bordeaux

Link of Simon Design ?