I'm reasonably new to all this but over the last few months I have been picking up parts and putting together my first GBZ.
I've watched so many videos and read many threads on here, which have all been very helpful so thanks to everyone.
I havnt done anything too out of the box, but as you will see i picked up a Gearbest TFT screen,
A Teency LC
this was also my first time soldering since i was at high school... many moons ago
I picked up the button PCB off ebay, from an Australian supplier. I'm in NewZealand so these parts arent easy to find locally.
I modified an aftermarket case from china, not the best quality, but it turned out ok for a first attempt
I also had trouble sourcing a RPi Zero, so started using a Rpi 3, which for obvious reasons wasnt ideal. But it gave me a good idea of what i was trying to achieve.
I also had trouble getting the Rpi to auto detect it was meant to be using composite video instead of HDMI, but worked it out eventually.
finally got it fired up on the Rpi3, even with its umbilical cords still attached.
then yesterday my Rpi Zero W finally arrived, and i got to replace the Rpi 3.
finally it all fits inside the case...
Next job is to find a battery system, and get it running completely portable.
Ive seen some of the cool things people have done, and i think once i get this one running off a battery, ill but a second lot of gear and make another one, but keep it tidy and legit.
any feedback is welcomed!
cheers for reading.
GBZ 
