Now I'm dealing with some audio issues, the post is right here: https://sudomod.com/forum/viewtopic.php ... 324#p59319
MichelleDB wrote: ↑Sat Mar 31, 2018 10:12 amSorry it took this long to answer, was having some technical issues.
Found the problem, basically the micro sd was damaged and was causing the problems, fixed as soon as I tried with a new card
Now I'm kinda stuck with sound, should I open a new thread for that, I'm using Helder's AIO.
It's driving me crazy, even after modifying the config.txt file it still refuses to output any audio.
Tried with both:AndCode: Select all
dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4
Code: Select all
dtoverlay=pwm,pin=18,func=2
Please forgive my noob'ish solder and finish, it's my first time doing this kind of stuff
Hi there,
So I started recently putting my Zero together and I've found myself in a pickle after having to resolder everything when I saw I had the power switch wrong configured for the Power Boost 1000.
Long story short, when I have the micro usb feeding the whole system through the USB and GRD connections on the power boost, the system keeps reseting itself when trying to boot the display, but, if I connect that micro usb to the USB-A connections on the power boost everything works fine.
Any idea what could be the issue here?
Thanks for reading.