CM3 Circuit Sword Fan Cartridge

Share your STL files, CAD design files, etc. here!
User avatar
Adim01
Posts: 41
Joined: Sat Jul 15, 2017 10:53 am
Has thanked: 16 times
Been thanked: 5 times

Re: CM3 Circuit Sword Fan Cartridge

Post by Adim01 » Mon Apr 09, 2018 3:25 pm

HoolyHoo wrote:
Mon Apr 09, 2018 3:01 pm
Did some initial test on the airflow since I was finally able to come close to completing my build. I can tell you that it looks very promising. Fan blows warm air out as intended and temperature drops quickly to stop the fan. Testing was done without a heat sink :o so I imagine when I do place one it should be that much better. Looking to use a flatter larger one since there is space with the fan relocated. Very impressed :D
That really sounds promising :D
I am sure it will be as or probablly better as the orginal, and on top you got the coolness factor :lol:

smoothoperator
Posts: 117
Joined: Tue Apr 25, 2017 2:59 pm
Location: Michigan, USA
Has thanked: 94 times
Been thanked: 40 times

Re: CM3 Circuit Sword Fan Cartridge

Post by smoothoperator » Mon Apr 09, 2018 5:50 pm

HoolyHoo I sent you a PM. Really interested in getting my hands on one of these!

User avatar
HoolyHoo
Posts: 725
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 230 times
Been thanked: 769 times

Re: CM3 Circuit Sword Fan Cartridge

Post by HoolyHoo » Mon Apr 09, 2018 6:12 pm

smoothoperator wrote:
Mon Apr 09, 2018 5:50 pm
HoolyHoo I sent you a PM. Really interested in getting my hands on one of these!
Sorry, just replied to your PM

User avatar
Nicode70
Posts: 104
Joined: Sun Feb 11, 2018 9:36 am
Has thanked: 19 times
Been thanked: 19 times

Re: CM3 Circuit Sword Fan Cartridge

Post by Nicode70 » Tue Apr 10, 2018 3:02 am

how did you fix the cable length problem? i've ordered a mal/femal cable with jst plug but i'm not sure how to fix the existing fan cable to the new one...
https://instagram.com/nicoGBPi
Nintendo ID: 0954-8664-4922

User avatar
HoolyHoo
Posts: 725
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 230 times
Been thanked: 769 times

Re: CM3 Circuit Sword Fan Cartridge

Post by HoolyHoo » Tue Apr 10, 2018 10:49 am

Nicode70 wrote:
Tue Apr 10, 2018 3:02 am
how did you fix the cable length problem? i've ordered a mal/femal cable with jst plug but i'm not sure how to fix the existing fan cable to the new one...
Just used small jst connectors and spliced the cable of the fan. It’s very thin but doable.

cowdog360
Posts: 34
Joined: Sun Feb 26, 2017 8:34 pm
Been thanked: 10 times

Re: CM3 Circuit Sword Fan Cartridge

Post by cowdog360 » Wed Apr 11, 2018 9:26 am

HoolyHoo wrote:
Mon Apr 09, 2018 3:01 pm
Did some initial test on the airflow since I was finally able to come close to completing my build. I can tell you that it looks very promising. Fan blows warm air out as intended and temperature drops quickly to stop the fan. Testing was done without a heat sink :o so I imagine when I do place one it should be that much better. Looking to use a flatter larger one since there is space with the fan relocated. Very impressed :D
I'm going to try your cartridge as just a vent, and go fanless to start. I'm using a larger slightly less tall heatsink on my build, it is 25mm x 25mm x 5mm high, and black anodized (black is more efficient at heat transfer with passive cooling).

This is what my heatsink looks like. Oh BTW, thanks for all your awesome work/parts.. they really make things easy/great. Been mentioning you a lot in my youtube video builds of my CSO.
Attachments
30571318_10215862500905346_8713127284980056064_n.jpg
30571318_10215862500905346_8713127284980056064_n.jpg (60.75 KiB) Viewed 1910 times

Acill
Posts: 4
Joined: Fri Jan 26, 2018 3:56 pm

Re: CM3 Circuit Sword Fan Cartridge

Post by Acill » Wed Apr 11, 2018 2:42 pm

i've printed a few of these now and have it dialed in quite nice. If anyone is looking for something printed just let me know. I cant print everything for everyone, but my usual fee is just send me a roll of filament if I dont have it in the color you need or shoot me a tip and cover the shipping cost here in the US.
30118539_10156374149444954_1832378689_n.jpg
30118539_10156374149444954_1832378689_n.jpg (77.25 KiB) Viewed 1894 times

User avatar
Italian77
Posts: 141
Joined: Thu Feb 22, 2018 8:54 pm
Has thanked: 48 times
Been thanked: 38 times

Re: CM3 Circuit Sword Fan Cartridge

Post by Italian77 » Fri Apr 13, 2018 8:02 am

HoolyHoo,

This looks great!

I have a dumb question though. Is this the fan mount you have been speaking of in other posts, or is there a separate project you were working on that is a fan mount without the cartridge?
My first Circuit Sword build - Custom Painted
https://sudomod.com/forum/viewtopic.php?f=43&t=5855

User avatar
HoolyHoo
Posts: 725
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 230 times
Been thanked: 769 times

Re: CM3 Circuit Sword Fan Cartridge

Post by HoolyHoo » Fri Apr 13, 2018 8:13 am

Italian77 wrote:
Fri Apr 13, 2018 8:02 am
HoolyHoo,

This looks great!

I have a dumb question though. Is this the fan mount you have been speaking of in other posts, or is there a separate project you were working on that is a fan mount without the cartridge?
Thanks! Yeah, this is my solution to the fan mount problem. I was just working on this for my build since I needed a dummy cartridge anyways and I thought it would be more efficient than other placements. It works very well so I decided to share it. I like the fact that it blows the warm air out.

There are are couple of other options on this forum that you may or may not have seen that might work for you if you prefer not to have it in the cartridge. :D

Astrix
Posts: 4
Joined: Sat Mar 03, 2018 8:50 am

Re: CM3 Circuit Sword Fan Cartridge

Post by Astrix » Tue Apr 17, 2018 2:56 pm

Thanks for the .stl HoolyHoo, it looks great. Will give printing it a go.
Does Kite sell the fan seperately? I got in on the 1st CSO order but the fan was optional. Or does anyone know where I could get one?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest