Using cartridge slot for the Pi camera and additional storage

General GBZ-related chat goes here. Share ideas, tips and tricks, or ask questions that don't fit into the hardware/software help forums.
Post Reply
User avatar
Mad_Duke
Posts: 91
Joined: Wed May 11, 2016 3:52 pm
Has thanked: 4 times
Been thanked: 9 times

Using cartridge slot for the Pi camera and additional storage

Post by Mad_Duke » Tue Jun 14, 2016 4:01 pm

Hi guys.

As my personal Gameboy project is going super slow. Hit a brick wall with a shitty screen that is god awful hot and takin it's toll on the battery I've had some (too much) time to think. Plus, working 10-12 hours a day for the last few weeks and the next... So, what I've decided on (the rest will be covered in my topic after the new screen comes.)

Camera.

I've always wanted to put the Pi camera somehow on the device, but decided that would be mostly ans impossible task. The only way woulg be using the "battery cover" area, but that would mean smaller battery. So, the next logical place to look was the cartridge slot. But, because the connection is by a flat cable that was a no no.
So I've decided to find a connector that would be best to use as an adaptor (so I don't use the original carthridge slot connector of the gameboy.

So, the basic idea is (I've ordered them already and waiting to come) is to use this
https://www.tindie.com/products/freto/p ... extension/

What I will do is. Inside the gameboy I will put one part and connect it with a flat cable to the Pi. The female jack on it will sit underneath the cartridge slot waiting for a HDMI connector (male) to connect to it from the outside (with an expansion unit/cartridge) I've started looking for the HDMI because it has enough pins and that's how I've found that pi camera hdmi cable extension up for grabs. :)

Software wise. Would like to be able to start up somehow a script (or a bunch of scripts) so I could use the buttons on the back for example (not all of these are possible or easy to implement, but one day...)

L1 - Take auto photo
R1 - Take auto raw photo
A - Increase shutter speed
B - Decrease shutter speed
X - Increase ISO
Y - Decrease ISO
Arrow keys - Navigate menu
Select - Back in menu
Start - Confirm changes in menu
Start+Select - Exit


USB Storage cartridge

I've loved it immediatly not just because of the camera thing but also because it has 4 pins that are left to use how you like. Which means that I can use the same thing for connecting a camera (with 5V USB being able to fire up the LEDs for example) and just make another carthridge that can be connected using the same board in which a stripped down USB sitck can be sitting so when you slide it in you can have additional storage. This is important to me because I can put a micro-usb port on the same cartridge on the side and via that you can connect the USB to any computer to fill it up (will research those with recessing USB port mehanisms also if it will be possible).
Why do I want that extra USB? Because software wise I will be using Attract-Mode for starting the games and having Kodi to watch movies (or streaming). So I can take that out, fill it with movies, TV shows or music and use the Kodi for playback (mainly this option is when conncted to a TV via HDMI port).

I wanted to put this here, outside of my build topic so You guys maybe get an inspiration. When I get it I will show my progress concerning this topic and then also finally update my build topic when I get the new screen.

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: Using cartridge slot for the Pi camera and additional storage

Post by Helder » Tue Jun 14, 2016 5:24 pm

I've actually been thinking of a custom pcb with the newer cart readers for the GBA and have 4 pins setup for USB coming from my All In One PCB in development go to some unused pins on the cart reader. Inside the Cartridge would be a USB connector that could be used for wifi or whatever really , this would require another Gameboy Custom Cart PCB to be developed but this might work with your idea.

Doesn't the Pi Zero have some pads on the underside that are for the camera attachment?
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

User avatar
Mad_Duke
Posts: 91
Joined: Wed May 11, 2016 3:52 pm
Has thanked: 4 times
Been thanked: 9 times

Re: Using cartridge slot for the Pi camera and additional storage

Post by Mad_Duke » Tue Jun 14, 2016 6:00 pm

All the ideas are welcome. I've just shared this as an example to include Camera in the mix.

Pi Zero, newer version has the Camera connector. I'll be using Pi3 :)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest