![20181019_133622.jpg](./download/file.php?id=13521&sid=06d17eba59becf9172bf3e9f71efe3a1)
- 20181019_133622.jpg (650.94 KiB) Viewed 3206 times
![20181019_133646.jpg](./download/file.php?id=13520&sid=06d17eba59becf9172bf3e9f71efe3a1)
- 20181019_133646.jpg (1.26 MiB) Viewed 3211 times
Found this handheld game for $10, made it into a gameboy zero.
![new-amp-sealed-mattel-classic-football-electronic-handheld-game-vintage-rare-4b7c5011b94a31b1afbccd6fcaa2b1e5.jpg](./download/file.php?id=13518&sid=06d17eba59becf9172bf3e9f71efe3a1)
- new-amp-sealed-mattel-classic-football-electronic-handheld-game-vintage-rare-4b7c5011b94a31b1afbccd6fcaa2b1e5.jpg (197.32 KiB) Viewed 3211 times
Components:
- mattel electronic football handheld
- ethernet cable as wire (works but ethernet wire a little stiff. more flexible wire would be greater)
tools used:
- hacksaw and coping saw (for cutting aluminum screen plate)
- glue for gluing in components
my resources are limited, i didnt have a fine tipped solder gun at my disposal so i was using one of these, a real headache but with much patience it worked!
![CT-8200PKS_000.jpg](./download/file.php?id=13517&sid=06d17eba59becf9172bf3e9f71efe3a1)
- CT-8200PKS_000.jpg (23.13 KiB) Viewed 3211 times
the gamepad pcb i was able to wire into gpio and use, and i plan on hooking up the 3 way switch to be 1. off and charging. 2. on and charging. 3. off and off?
to do:
- connect speaker for sound
- wire on/off switches (would like to add a backlight switch)
- add second plate on face (the first was a rough cut and has a slight gap)