Potential mintypi v3 mods

[gamingbro]

but the back buttons are great but also I suggest getting laser tins in case your bad with a knife or scared of hurting yourself

[StaticNebula26]

Thinking about potential camera mod, bpi m2 zero swap and shoulder button upgrade. Any more suggestions?

I suggest not doing the mods...
The banana pi zero can throw out a ton of heat and in a metal tin this is not good, dont see how you can upgrade the shoulder buttons as they are already improved and pretty optimal but id love to hear your idea, and the camera mod....

Thanks for the info on the bpi. Does anybody have a suggestion for a raspberry pi clone?

[KonnorJ]

Thinking about potential camera mod, bpi m2 zero swap and shoulder button upgrade. Any more suggestions?

I suggest not doing the mods...
The banana pi zero can throw out a ton of heat and in a metal tin this is not good, dont see how you can upgrade the shoulder buttons as they are already improved and pretty optimal but id love to hear your idea, and the camera mod....

Thanks for the info on the bpi. Does anybody have a suggestion for a raspberry pi clone?

For the MintyPi I would just use the pi zero w

[MintyJam]

They would be wider shoulder buttons so you can hit them easier.

....
dont see how you can upgrade the shoulder buttons as they are already improved and pretty optimal but id love to hear your idea,
....

A little while ago, I contacted Wermy about this option...
Sadly I don't get a respose, so does anyone know if he's still alive????

Elongated L- and R-buttonsShow

Hello wermy, again...

Can you redesign the custom silicone L- and R-buttons, so they are elongated? Like the GameBoy Color?

This way the buttons have a bigger surface area, feel nicer (to my opinion) and it would fit well with the board Helder made.

Or do you say that we can just directly buy these buttons shown above and cut them in half? That would also be no problem by the way...

MintyJam

BTW the buttons shown above are actually GameBoy Color START/SELECT buttons...

[Helder]

Kind of hard to redesign anything after I've had enough made for the current batch. If there will be avredesign it'll be in the future but you're free to try those buttons above.

[MintyJam]

OK thanks for the lightning-fast respose!

[gamingbro]

hey for the camera dude hers a raspbery pi camera but i dont think it will fit but i found it while buying a rasepbery pi o so heres the link https://www.raspberrypi.org/products/pi-noir-camera-v2/

[StaticNebula26]

hey for the camera dude hers a raspbery pi camera but i dont think it will fit but i found it while buying a rasepbery pi o so heres the link https://www.raspberrypi.org/products/pi-noir-camera-v2/

I’m going to try the RPi IR-CUT camera from waveshare so I can get decent pictures at any time of day

[StaticNebula26]

I’m also thinking about berryboot so I can use the mintypi as a normal pi

[gamingbro]

nice but where will you put also when do u think they wil make a bana cream pi