heating issues?
heating issues?
I've put together my mintypi v3 almost completely, but before i screwed everything together, i noticed that the pi was getting very hot. hot enough to warp the PLA printed parts. i can't imagine that that's normal or safe, especially since the cpu where it is hottest goes directly over the battery. what could be causing this problem? bad pi? bad connections? (I've double checked all test pads and they have good continuity so probably not?) something else? I really don't know what's causing it.
a few things to note, i'm still running off of wall power, and my screen can get a bit flickery at times, displaying random colored lines or boxes. sound is fine. idk if that's relevant but doesn't hurt to add it.
a few things to note, i'm still running off of wall power, and my screen can get a bit flickery at times, displaying random colored lines or boxes. sound is fine. idk if that's relevant but doesn't hurt to add it.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: heating issues?
The pi is overclocked in the image used, maybe try turning it off or try running off of the battery to see if there's a difference. The pi will get hit but not enough to warp the PLA.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: heating issues?
I have this pack at home, which you can easily find anywhere locally. I added the flat thin copper heat sink on the Zero CPU.
https://www.amazon.com/Lanpu-Raspberry- ... B079K43ZTZ
You have enough room to stick one there. It definitely helps a bit with heat dissipation especially if you want to keep the Pi overclocked a bit.
https://www.amazon.com/Lanpu-Raspberry- ... B079K43ZTZ
You have enough room to stick one there. It definitely helps a bit with heat dissipation especially if you want to keep the Pi overclocked a bit.
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: heating issues?
That’s very strange, I’d say something is up with your pi. It does get warm but even with the overclock, it shouldn’t be anywhere near hot enough to deform the PLA.
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: heating issues?
happened to me before something similar, was a software issue try to reflash the img...
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: heating issues?
so another problem, i can't get it to run off battery? i charged the battery up all the way until the light turned off, but when i push the power button it won't turn on. i checked the wiring harness and there's continuity between the battery board and the main one. could this be result of the bad mosfet chip?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: heating issues?
You're 5V point is not properly connected, I forgot to add a test point for it so use this image as a reference to where you can test continuity for the 5V rail.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: heating issues?
Make sure the voltage of the battery is above 3.5v using the multimeter. Are you getting nothing at all or does it come on briefly?
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest