System won't shut down. Solution here
System won't shut down. Solution here
Finished my V3 build today and they system won't shut down either through the magnet sensor or the system shutdown, the system goes through the shut down process and then reboots. I have tried re-flashing the SD card to no avail. I have read here that some have had bad power boards, is there some way to test for this? Is there anything else I can do to fix my system?
- LilTrublMakr
- Posts: 365
- Joined: Sun Aug 05, 2018 6:39 am
- Has thanked: 24 times
- Been thanked: 120 times
- Contact:
Re: System won't shut down
Are you plugged directly in to the Pi or powered through the power board? It needs to be powered through the power board for the power down to work correctly.
@LilTrublMakr
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
Re: System won't shut down
Yes I am powered through the power board, it does not power down when connected via USB-C and when running on battery. The only way to power it down is by using the power button.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: System won't shut down
This is an issue that some powrboards are causing. Seems a few bad dual-fet chips are the culprit. Send me an email and we can discuss a solution.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: System won't shut down
So this is now happening to me as well. Just today it was working perfectly but now for some reason it's rebooting instead of turning off. I just find it weird how it went from working to not working
-
- Posts: 1
- Joined: Sun Feb 09, 2020 2:49 pm
Re: System won't shut down
Jumping in as I have the same issue. When i originally ordered the kit, it came with a second power board. I've swapped the board and still the HAL/soft shutdown procedure only restarts the unit. Continuity on test pads have been checked and re-checked. Battery has full charge, and correct voltage. I've re-flashed, swapped SD cards, and tried different computers. Yes, it's only powered on battery.
Seems unlikely I'd have two dud power boards. Anybody have another diagnostic trick I missed in the forums? I just wrapped up a second build and it's working flawlessly so I'm a bit stumped.
Seems unlikely I'd have two dud power boards. Anybody have another diagnostic trick I missed in the forums? I just wrapped up a second build and it's working flawlessly so I'm a bit stumped.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: System won't shut down
Some bad chips have been mixed in this batch but the good powerboard which was labeled extra is almost a definite good to go. This is the last batch of these chips to be used in anything else I will make going forward since they are not being made anymore.
Send me an email and I can send you a new chip and I made a video showing how it's easy to swap and it will fix your issue.
Send me an email and I can send you a new chip and I made a video showing how it's easy to swap and it will fix your issue.
Your constant posts to bash me or the mintyPi or other criticism is getting real annoying if you have nothing important to add then don't post as you are not helping anyone solve their issue.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: System won't shut down. Solution here
why not just flip the switch before it gets the chance to reboot? Also, I would try running the battery completely dry, then letting it charge for a few hours, then try again. It may not help, but that first one is a solid go-to
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: System won't shut down. Solution here
This is for the V3 where it's a Push button power switch not the Lite slide switch, totally different hardware.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest