[PRE-ORDER] Circuit Sword (+ Lite), Circuit Shield + Circuit Gem - CLOSED

[kite]

Circuit Sword (+ Lite), Circuit Shield + Circuit Gem
Pre-order

STATUS: PRE-ORDER CLOSED
KITE'S MAILING LIST



What is the Circuit Sword?

The Circuit Sword is a circuit board that contains everything required to run a Raspberry Pi Compute Module. The Circuit Sword belongs in every adventurer's inventory!

SHOW DETAILSShow

Specifications

• Built-in Raspberry Pi Compute Module slot
• Built-in USB 2.0 hub
• Built-in ATMEGA32u4 (for buttons and joysticks)
• Built-in status LEDs (Power, Charging, WiFi, Pi activity)
• Built-in 1.5A charger and load balance chip
• Built-in regulators (1.8v, 3.3v and 5v)
• Built-in micro SD slot
• Built-in 2.4W amplifier and headphone jack
• Built-in mini HDMI for video output
• Built-in temperature-activated fan solder pads (fan not included, recommended 'sunon 30mm')
• Built-in battery monitor
• Built-in safe shutdown circuit
• Built-in emergency shutdown circuit
• Built-in WiFi
• Built-in full-sized USB port
• Built-in USB C port
• Built-in USB audio chip
• Built-in DPI LCD connector

Accessories (included)

• Raspberry Pi Compute Module 3 Lite
• 320x240 LCD
• Back board (for USB and HDMI)
• Power switch board
• 8ohm 2W speaker
• Heatsink
• Second back board (for additional buttons)
• Connecting wires (for speaker, joysticks and additional buttons)
• FPC cable

Accessories (optional)

• 640x480 HD LCD (same overall dimensions as 320x240 LCD, no adapter required)
• Alternative back board (for USB with a volume wheel instead of HDMI) + connecting wire

What is the Circuit Sword Lite?

The Circuit Sword Lite is a simplified Circuit Sword that contains everything required to run a Raspberry Pi Zero. It is the perfect item for adventurers on a budget!

SHOW DETAILSShow

Specifications

• Built-in Raspberry Pi Zero header
• Built-in GPIO button controller
• Built-in status LEDs (Power, Charging)
• Built-in 1.5A charger and load balance chip
• Built-in 2.4W amplifier and headphone jack
• Built-in volume wheel
• Built-in battery monitor
• Built-in safe shutdown circuit
• Built-in emergency shutdown circuit
• Built-in full-sized USB port
• Built-in micro USB port
• Built-in USB audio chip
• Built-in DPI LCD connector

Accessories (included)

• 320x240 LCD
• Back board (for USB and volume wheel)
• Power switch board
• 8ohm 2W speaker
• Second back board (for additional buttons)
• Connecting wires (for speaker and additional buttons)
• FPC cable
• GPIO pin header

Accessories (optional)

• NONE

What is the Circuit Shield?

The Circuit Shield is a circuit board that contains everything required to run a Raspberry Pi Compute Module. It is the perfect item for adventurers levelling up!

SHOW DETAILSShow

Specifications

• Built-in Raspberry Pi Compute Module slot
• Built-in ATMEGA8 (for buttons and joystick)
• Built-in status LEDs (Power, Charging, WiFi, Pi activity)
• Built-in 1.5A charger and load balance chip
• Built-in regulators (1.8v, 3.3v and 5v)
• Built-in micro SD slot
• Built-in 2.4W amplifier and headphone jack
• Built-in mini HDMI for video output
• Built-in battery monitor
• Built-in safe shutdown circuit
• Built-in emergency shutdown circuit
• Built-in WiFi
• Built-in full-sized USB port
• Built-in USB C port
• Built-in I2S audio chip
• Built-in DPI LCD connector

Accessories (included)

• Raspberry Pi Compute Module 3 Lite
• 320x240 LCD
• 8ohm 2W speaker
• Connecting wires (for speaker and additional buttons)

Accessories (optional)

• NONE

What is the Circuit Gem?

The Circuit Gem is a miniature circuit board that contains everything required to run a Raspberry Pi Zero. It is the perfect item for adventurers on the move!

SHOW DETAILSShow

Specifications

• Built-in Raspberry Pi Zero header
• Built-in GPIO button controller
• Built-in status LEDs (Power, Charging)
• Built-in 800mA charger and load balance chip
• Built-in 3W amplifier
• Built-in battery monitor
• Built-in safe shutdown circuit
• Built-in emergency shutdown circuit
• Built-in micro USB port
• Built-in I2S audio chip
• Built-in SPI LCD connector for 240x240 IPS LCD

Accessories (included)

• 240x240 LCD
• Micro speaker
• Connecting wires (for battery and additional buttons)

Accessories (optional)

• NONE

Timeline

Dates in DD/MM/YYYY

[24/02/2020] Pre-orders open
[08/03/2020] Pre-orders close
[15/03/2020] Manufacturing
[06/06/2020] Items in transit
[29/06/2020] Testing
[06/07/2020] Packaging / Express shipping
[13/07/2020] Shipping < You are here

Questions?

Kite's FAQ
Kite's Item Wikis
Kite's Support Forum

[kite]

Reserved

[BigStotty]

Yeay, been waiting months for this so glad its finally here and i can also get the Shield at the same time

Will you be putting up a guide for the Shield or will it be similar to other pocket builds?

[Jo.Ckel]

200€ for Circuit shield including taxes... :-O
Dude it´s so great what you are doing but unfortunately not affordable this time.

[BigStotty]

200€ for Circuit shield including taxes... :-O
Dude it´s so great what you are doing but unfortunately not affordable this time.

I know it was a bit more than i thought but then i forgot about the damn tax

[makyoplus]

Yesssss, I’ve been counting down the days! Circuit Shield preordered >:)

[Jo.Ckel]

Jep.... same. Damn Tax!!!

Maybe I can grab one during next round or whatsoever....

[Memodellocos]

Is there information regarding battery life on the Circuit Shield?

I’ve search around but could not find anything.

Thanks!

[makyoplus]

Circuit shield coming my way, woohooooooooo!

[Hivetyrant]

So the shield fits in a gameboy pocket case?

I pre-ordered anyways, After the joy of building the sword I'm up for anything Kite makes at this point!